Main Technical Parameters:
|Packaging speed||Stable at 45bags/min,|
|Packaging method||Pre-made bags,bottom and side gusset|
|Packaging material||PE or complex film, single thickness was 50-100μm|
|Packaging dimension||L≤400mm ,W=200mm-400mm,H=90mm -200mm|
|Installation power||About 19KW|
|Power requirement||Three phase four wires system(A,B,C,PE),380V/50Hz|
|Air requirement||Input pressure: 0.6-0.8MPa, air consumption≦200LPM|
1.Fully servo driven,Servo motor management by electronic CAM
2.Two levels compression, suitable for varied size of packing
3.Modular structure design
4.Quick Auto/ Manual packing size switching
5.Force restrict protection, stable running
6.Stacking and packing 2 in 1, less land occupied
7.Suitable for single row or double rows packing
1.Widely used in sealing of plastic packaging of baby diaper
2.Mitsubishi motion and control PLC and bus type servo driven
system ensure that high level of packaging precision and
reliability can be achieved.
3.Cut cost in manufacture and operation management; save more
4.Compact, smaller footprint, easy operation and stable capability
5. Four pushing arms ensures that a speed of 40bags/min can be
achieved even when packaging large size product.
6. Applied to both side gusset plastic bag and bottom gusset
7.All of the machine parts should do the surface treatment, and
transmission parts made of the special steel and quenching and
8.The Base with the tube that wall thickness is 6mm, braced frame
with solid rectangular steel that thickness is 50mm, the main panel
using steel plate that thickness is 15mm.
9.Engineer service overseas after sales
10. The emergency stop is safe and no damage to the equipment.
11. The electrical system device in accordance with the relevant
provisions of GB/T5226.1-2002.
12. Safety protection device in accordance with the relevant
provisions of GB5083-1999.